the design of injection moulds

This paper is talking about the design of injection moulds; which is an important equipment of plastic forming. Injection molding is to make glutinous fusibility form required plastic product with designed shape and size in closed moulds under needed pressure by means of plastic extrusion and plasticity. The plastic product is a outer covering for a box body. According to its technical request and used request, ABS is to be closed as its material. According to its designed shape and the numbers of the products, we choose the sz-300/160 cast shaper. At the same time, we use the hydraulic pressure to pull out the long core organization which is steady for the long core.  This mold uses a mold cavity, a minute leaves models. The core and the cavity uses the cooling water system, tuck to exhaust the gas, but avoids the flaw. After ascertaining the project of the structure of the mould, protract mould-fitting drawing. At last, carry out an all-around checkout and auditing and launch into manufacture.   Key words: the injection moulds, the outer covering for a box body, core , a mold cavity